Table of Contents
Advertisement
6 F 8 A 0 5 2 1
[NOTE]
Install the converter cover when operating the density meter. In addition, tighten securely
the screws of the converter cover. If screws are not tightened enough, moisture, dust or
other particles enters the converter and can cause a converter failure.
(1)
[POWER] switch
The power switch for the density meter.
(2)
[Fuse]
2A(T), 250V glass tube fuse is inside.
(3)
[POWER] Indicator (Green LED)
Green LED lights when AC power turns on by the power switch.
(4)
[MEASURE] Indicator (Green LED)
The indicator lights when measuring, and turns off when setting and when measuring stops at
externally synchronized operation.
(5)
[ALARM] Indicator (Red LED)
Lights on error signal from the meter.
(6)
LCD indicator
Displays measured values, set values and self-diagnosis data, etc. Being an indicator of 20
characters by 4 lines, it displays numerical values, alphanumeric characters and symbols in
accordance with needs.
(7)
Setting keys
These keys are used for switching between display contents of the LCD indicator or setting
various set values. They include the [ESC] key, the [→] key, the [UP] key, [DN] key and the
[SET] key.
(8)
Terminal block
Refers to the terminal block connecting cables for external connection.
(9)
Cable glands
Six cable glands are available for introducing cables for external connection, such as power
supplies and output signals.
28
Advertisement
Table of Contents
