Default Settings For Manual Mode - Siemens SINUMERIK 840D sl Operating Manual

2.7.5

Default settings for manual mode

Specify the configurations for manual mode in the "Settings for manual operation" window.
Presettings
Settings
Type of feedrate
Default feedrate G94
Default feedrate G95
Variable increment
Spindle speed
Proceed as follows
HMI sl Universal
Operating Manual, 01/2008, 6FC5398-6AP10-2BA0
Press the "Rapid traverse" softkey.
The rapid traverse is displayed in field "F".
5. Enter the target position or target angle for the axis or axes to be
traversed.
6. Press the "CYCLE START" key.
The axis is traversed to the specified target position.
If target positions were specified for several axes, the axes are
traversed simultaneously.
Description
Here, you select the type of feedrate.
G94: Axis feedrate/linear feedrate
•
G95: Rev. feedrate
•
Enter the desired feedrate in mm/min.
Enter the desired feedrate in mm/r.
Enter the desired increment for axis traversal by variable increments.
Enter the desired spindle speed in rpm.
1. Select the "Machine" operating area.
2. Press the "JOG" key.
3. Press the menu forward key and the "Settings" softkey.
The "Settings for manual operation" window is opened.
...
Setting up the machine
2.7 Manual mode
67