Setting up the machine
2.5 Work offsets
2.5.6
Deleting a work offset
You have the option of deleting zero offsets. This resets the entered values.
Proceed as follows
...
56
1.
Select the "Parameter" operating area.
2.
Press the "Work offset" softkey.
3.
Press the "Active", "Base" or "G54...G599" softkey.
4.
Press the "Details" softkey.
5.
Position the cursor on the zero offset you would like to delete.
6.
Press the "Clear Offset" soft key.
Operating Manual, 01/2008, 6FC5398-6AP10-2BA0
HMI sl Universal