Setting The Antenna Power; Setting The Permanent Timeshift; Setting A Recording Storage Location - LG HR500 Owner's Manual

32 Installation

Setting the antenna power

If you are using indoor antenna with a signal
amplifi er rated at DC 5V, 100mA, the recorder
can supply power through ANTENNA IN jack.
1. Display [Setup] menu.
2. Use U / u / I / i to select the [Antenna Feed
5V] and press ENTER ( ).
3. Use U / u to select the [On], and press ENTER
( ) to supply antenna power.
3
NOTE
The [Antenna Feed 5V] option must be set to [Off ]
when your indoor antenna is supplied the power
from the mains. If you set the [Antenna Feed 5V]
option to [On] for the indoor antenna which is
supplied power from the mains, it may cause
serious defect to this unit.
Setting the permanent
Timeshift
You can set the Time Shift function
automatically without pressing TIME SHIFT
button. The timeshift will start after Digital TV
tuner mode is started.
1. Display [Setup] menu.
2. Use U / u to select the [DTV], and press
ENTER ( ).
3. Use U / u to select the [Permanent Timeshift]
and press ENTER ( ).
4. Use U / u to select the [On] to apply
permanent timeshift.
Setting a recording storage
location
You can set the storage location where you
want to store the DTV recordings.
1. Display [Setup] menu.
2. Use U / u to select the [OTHERS], and press
ENTER ( ).
3. Use U / u to select the [REC Device] and
press ENTER ( ).
4. Use U / u to select a storage, and press
ENTER ( ).
NOTE
This option is not available while recording.