Table of Contents
Advertisement
Programming Manual for Digital Key Telephone System
300 & LDK-100
BTN 9)
Condition
1. The callback will ring with Tone mode
regardless of intercom signaling mode.
2. A station can leave only one callback or
message. A new request will override the
previous one.
3. Message wait data will be protected with
power failure.
4. When dialing the station number instead of
pressing the [CALLBK] button to answer a
message wait, the message wait will be
canceled in the calling station.
5. Message wait reminder tone is programmable
from 00 to 60 min. If you don't want to present
the tone, the timer may be set to 00.
6. Message wait reminder tone is not heard at a
busy station.
7. Message wait reminder tone will continue until
all the messages are retrieved.
8. When a station attempts to leave a message
at a station which has already 5 messages
and one of those is not equal to the
attempting station, error tone will be heard.
When VMIB access is allowed in the station,
after recording VMIB message, it turns to
normal message in the station. In this case,
error tone will not be provided in the
attempting station.
MUTE
Description
The transmitting audio from a keyset can be
blocked by the user so that the voice at the
keyset is not sent to the connected party thus
providing privacy for local discussions.
Operation
To mute the transmitting audio,
Press the [MUTE] button and LED of the [MUTE]
button is illuminated. Th e connected party cannot
hear the voice of muted station.
To restore transmission,
Press the illuminated [MUTE] button. LED of
[MUTE] button is extinguished and transmission
is restored.
Condition
1. Changing from the speakerphone to handset,
the mute is released.
2. Selecting another DSS button, mute state will
not be changed.
PREPAID CALL
Description
This feature allows the guest station to make a
call according to his prepaid money. If the
prepaid money expires during a call, warning
tone will be heard and after Prepaid Call
Warning
time
expired,
disconnected. The guest station cannot make an
outgoing CO line call after the prepaid money
has expired.
Operation
To register/change the prepaid money, (at the
Attendant station)
1. Press the [TRANS/PGM]
attendant station.
2. Dial 0 7 9.
3. Enter the station range.
4. Enter the prepaid money.
5. Press the [HOLD/SAVE] button.
Admin Programming
n
Prepaid Call (PGM 112-BTN 8)
n
CO Call Drop Warning Timer (PGM 180-BTN
16)
Condition
1.
This feature is allowed when a call-metering
signal is provided by PX.
2.
After prepaid money has expired, the guest
station can receive incoming CO line call and
incoming CO transfer call from other stations.
But the station cannot receive outgoing CO
transfer call.
3-19
LDK-
System Features
the
call
will
be
button
at
the
Advertisement
Table of Contents
