Table of Contents
Advertisement
Programming Manual for Digital Key Telephone System
300 & LDK-100
stored as the first or second digit and the
seized CO line is behind PBX mode, its
function is Dial Tone Detect. Otherwise,
its function is '*'.
d. [FLASH] button – If seized CO line is
analog line, its function is Flash to PX (or
PBX). If seized CO line is ISDN line and
it is stored as the first digit, it makes
remaining digits sent with enveloped not
in calling party number IE but in keypad
facility IE.
4. If you dial an empty station speed bin, error
tone will be heard.
5. If you select a CO line before dialing speed
bin number, the selected CO line is used
though there is programmed CO line in the
speed bin number.
6. You can program a station name (max. 7
characters) in the keyset to be presented
instead of station number. The name is
programmed in the speed bin 000. When the
station name is programmed, the speed bin
is not used as a station speed bin.
SYSTEM SPEED DIAL
Description
The system speed dial bins are programmed by
system attendant. These numbers are available
for easy access by all stations allowed in the
system. Max. system speed dial capacity is 1500
in LDK-24 system.
Operation
To store a number in a System Speed Dial from
the system attendant,
1. Press the [TRANS/PGM] button.
2. Press the [SPEED] button.
3. Dial the system speed dial bin.
4. If desired, press the CO line or Group button.
5. Dial the desired phone number (max. 24
digits)
6. Press the [HOLD/SAVE] button.
7. If
desired,
enter
characters)
by
character.
8. Press the [HOLD/SAVE] button.
the
name
(Max.
dialing
2-digit
for
*. To store continuously, repeat the above
procedure from 3.
To place a call using System Speed Dial from a
keyset,
1. Lift the Handset or press the [MON] button.
2. Press the [SPEED] button.
3. Dial the System Speed Dial bin.
Admin Programming
n
Speed Dial Access (PGM 112-BTN 9)
n
System Speed Zone Access (PGM 232)
n
Dial Tone Detect (PGM 160-BTN 6)
Condition
1.
The CPTU should be installed for dial tone
detect.
2.
System Speed Dial is restricted by Station
COS.
3.
There can be max. 24 digits in a system
speed dial number including some digits and
special function codes.
Special function codes
a. [CALLBK] button – Pause
b. '*' – If it is stored as the first digit, its
function is Display Security. Otherwise,
its function is Pulse to DTMF Switchover.
c. [DND/FOR] button – If PGM 42-BTN 5 is
ON and it is stored as the first or second
digit and the seized CO is behind PBX
mode, its function is Dial Tone Detect.
Otherwise, its function is '*'.
d. [FLASH] button – If seized CO line is
analog line, its function is Flash to PX (or
PBX). If seized CO line is ISDN line and
it is stored as the first digit, it makes
remaining digits sent with enveloped not
in calling party number IE but in keypad
facility IE.
4. If you dial an empty system speed bin, error
tone will be heard.
5. If you select a CO line before dialing system
speed bin number, the selected CO line is
used though there is programmed CO line in
12
the system speed bin number.
each
6. If all CO lines in the group are busy, busy
tone will be received when accessing a
1-19
LDK-
CO Line Features
Advertisement
Table of Contents
