Sony LKRA-009 Installation Manual page 48

3. Set the 3D filter assembly to the support frame 3 while being careful with the up-down direction as
shown in the illustration.
4. Secure the filter with the four screws.
n
Attach the 3D filter assembly (L) to the main projector and the 3D filter assembly (R) to the sub-
projector.
B4 x 8
3D filter assembly (R) or
3D filter assembly (L)
3D filter assembly (R) or
3D filter assembly (L)
Set the 3D filter assembly with
the label side placed in the back.
L
Attach it in the direction that
the letter can be read correctly
in either case of opening/closing
in the right/left direction.
2-28 (E)
B4 x 8
Upper
side
3D filter assembly (R) or
3D filter assembly (L)
Set the 3D filter assembly with
the label side placed in the back.
Ｒ
Attach it in the direction that
the letter can be read correctly
in either case of opening/closing
in the right/left direction.
Support frame 3
Upper
side
Digital Cinema Dual System