Deleting A Pre-Shared Key; Managing Connections - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Parameter
Secret Key
6. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
7. Click Exit Transaction or continue making changes.
Section 5.28.5.3

Deleting a Pre-Shared Key

To delete a pre-shared key, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to tunnel » ipsec » preshared-key. The Preshared Key table appears.
1
Figure 724: Preshared Key Table
1. Add Button 2. Edit Button
Click Delete next to the chosen pre-shared key.
3.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.28.6

Managing Connections

An IPsec connection is an encrypted connection between two devices who share the same pre-authorized
authentication key.
The following sections describe how to configure and manage connections for an IPsec connection:
• Section 5.28.6.1, "Viewing a List of Connections"
• Section 5.28.6.2, "Adding a Connection"
620
Description
Synopsis: The aes-cfb-128-encrypted-string works exactly like des3-cbc-encrypted-
string but AES/128bits in CFB mode is used to encrypt the string. The prefix for
encrypted values is '$4$'.
The pre-shared key.
3. Delete Button
2 3
Deleting a Pre-Shared Key
RUGGEDCOM ROX II
User Guide