Deleting An Event Tracker; Managing Switched Ethernet Ports - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Parameter
Rise
state
6. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
7. Click Exit Transaction or continue making changes.
Section 3.17.4

Deleting an Event Tracker

To delete an event tracker, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to global » tracking. The Event table appears.
1
Figure 91: Event Table
1. Add Button
3. Click Delete next to the chosen event tracker.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 3.18

Managing Switched Ethernet Ports

The following sections describe how to configure and manage switched Ethernet ports:
• Section 3.18.1, "Viewing a List of Switched Ethernet Ports"
• Section 3.18.2, "Configuring a Switched Ethernet Port"
• Section 3.18.3, "Configuring Port Security"
Deleting an Event Tracker
Description
The number of times success occurs before changing the tracking state from down to
up.
Synopsis: up, down
Default: up
The state of the event.
2. Edit Button 3. Delete Button
Chapter 3
Device Management
2 3
89