Configure Settings
Will a network address translation (NAT) service give your DMP a private IP address? If so:
Step 8
a.
b.
Click Apply.
Step 9
Click Save Configuration in the Administration list, and then click Save.
Step 10
Click Restart DMP in the Administration list, and then click Restart.
Step 11
Step 12
Ship or deliver the DMP to its deployment site, and then:
a.
b.
c.
Stop. You have completed this procedure.
Step 13
Related Topics
•
Prepare Your DMP to Use a Static IP Address Over Wireless
Timesaver
Complete this optional procedure at your discretion. It explains what to do when a DMP's ultimate deployment site does
not use DHCP.
Before You Begin
•
•
•
•
Getting Started Guide for Cisco Digital Media Players
34
Choose Yes from the Using NAT list.
Enter in the NAT IP Address field the 1-to-1 public address (which is configured on the local router)
that corresponds to the private IP address.
Connect it to its presentation system.
Connect it to its local network segment.
Connect it to its power source.
Prepare Your DMP to Use a Static IP Address Over Wireless, page 34
Verify that your wireless network is working correctly, is available, and you understand how it
authenticates connection requests.
Establish an Ethernet
Connection.
Establish a Wireless Network
Log in to
DMPDM.
Connection.
78-19212-02