Lighting Settings - Sony DVS-9000SF User Manual

Lighting Settings

This effect provides the effect of light striking the image. The following
lighting patterns are available:
• Plane
• Bar
• Preset (lighting pattern suitable for nonlinear effects)
Note
You cannot select Bar for an image subjected to a nonlinear effect.
Applying the Lighting effect
Use the following procedure.
1
2
3
4
90
DME Special Effect Operations
In the DME menu, select VF5 'Light/Trail' and HF1 'Lighting.'
The Lighting menu appears.
Press [Lighting], turning it on.
The Lighting effect is enabled.
In the <Light Pattern> group, select the lighting pattern Plane, Bar or
Preset.
You can adjust the intensity of the light and other parameters with the
knobs.
Set the parameters.
The parameters differ as follows, depending on the selected lighting
pattern.
• When Plane is selected
Knob Parameter
1 Light
5 Total Ambient Brightness of whole image
a) You can make the Lighting effect more effective by adjusting [Total Ambient] to lower the
brightness of the entire image. This setting is used both by this effect and by the
Spotlighting effect.
• When Bar is selected
Knob Parameter
1 Light
Adjustment
Intensity of light in highlight area 0.00 to 100.00
Adjustment
Intensity of light in highlight area 0.00 to 100.00
Setting values
a)
0.00 to 100.00
Setting values