Nonlinear Effect Settings - Sony DVS-9000SF User Manual

Nonlinear Effect Settings

You can add a variety of effects, including effects that change the shape of the
image as a whole. Use the following procedure.
1
In the DME menu, select VF4 'Non Linear' and HF1 'Type.'
A menu for selecting the various effects appears.
2
Display the menu for the effect that you want to apply by pressing its
button.
The effect displayed is enabled.
3
Make the settings for the selected effect.
The following nonlinear effects are available.
Name
Wave
Mosaic Glass Makes the image rougher and finer at a specified
Flag
Twist
Ripple
Rings
Broken Glass Partitions the image like broken glass, with shards
Flying Bar
Blind
Split
Split Slide
Mirror
Multi Mirror
Kaleidoscope Creates an image like a view into a kaleidoscope.
Lens
Circle
Panorama
Effect
Produces a wave-like effect in the image.
interval.
Applies an effect like a flag waving in the wind.
Twists the image.
Applies an effect like ripples moving across the image. page 70
Partitions the image into rings that rotate while moving
in the same direction.
flying outward.
Divides the image into bars which peel off in two blocks
as they move.
Divides the image into bars or wedges, with blocks
rotating like the slats of venetian blinds.
Splits the image upper and lower, left and right.
Divides the image into bars which slide alternately in
reverse directions.
Partitions the image vertically and horizontally, creating
an image like a reflection in a mirror.
Divides the image into originals and reflections, lining
them up vertically and horizontally.
Creates an image like a view through a lens.
Makes a circle with the image.
Curves the upper and lower edges of the image to
emphasize the sense of perspective.
See
page 64
page 69
page 69
page 69
page 75
page 76
page 76
page 76
page 77
page 78
page 79
page 80
page 80
page 81
page 83
page 83
DME Special Effect Operations
63