Table of Contents
Advertisement
WIT-300H User Manual
Issue: 0.4C
Condition
1. When Call Forward is active, a station can make outgoing calls (internal or external) but cannot
activate a Call back or Queue request.
2. Attempting activation of Call Forward will automatically deactivate any activate Custom Display
Message. Active Call Back or Queue requests are not canceled.
5.3.6
Call Waiting
Description
Call Waiting is used to notify a busy station that an Intercom call is 'waiting'. The busy station is notified of
the call waiting by "Camp-on" tone.
After receiving a busy signal, the calling station Camps-on to the called station. The called station, can
respond by:
1. answering the waiting call, placing the active call on Hold first.
2. sending a Silent Message,
3. activating One-Time DND, or
4. ignoring the Camp-On tone.
Operation
During Called party is busy
This Document Contains proprietary information and may not be reproduced or copied without express
Written permission of a duly authorized representative of LG Electronics company
*
26
Date: 24/May/2005
Advertisement
Table of Contents
