Replacement Of The Electrostatic Bar - Electrolux IC4 4819 FFS Service Manual

Service
Manual

Replacement of the electrostatic bar:

• Machine on.
• When folding is running, approach the screw drive tester with lamp to a pin of the
antistatic bar.
• If the bar is running the screw drive lam will be on.
Remove / Assembly:
1. Remove the left frame of the machine.
2. Remove the wire of the faulty electrostatic bar.
3. Remove the bar and replace it by a new one.
4. Connect the wire on the new bar.
5. Put back the frame.
04102011/GB
43.2015
Electrostatic bar
36
5