Service
Manual
Description
The feeding table vacuum system comprises the following elements:
• 1 motor 'M3' to vacuum the linen on the feeding table,
a 2
sd
motor 'M11' is also mounted only on IC4 4832FFS.
• 1 breaker 'Q4' to protect the motors against overvoltage.
• 1 contactor 'KM3' to control the motors.
• 1 switch 'S7.11' to control the manual feeding.
The M3 and M11 motors are mounted in the low part of the machine. They are accessible by
removing the rear housing of the machine.
The Q4 breaker and the KM3 contactor are mounted in the electric cabinet. They are accessible
by removing the left side frame of the machine.
The S7.11 switch is mounted under the ELECTROLUX ITS.
04102011/GB
21-2012
Feeding: Vacuum system
fan motors
fan motors
feeding table
28
1