Siemens SINUMERIK 840D sl Operating Manual page 331

Display Dialog page main instance: Step tree
Here, using an example, it is shown how a step tree can be structured in the logbook.
Figure 4-115 Example, display in the logbook: Dialog page Step tree (button Details on activated)
Display, subinstances in the step tree
Depending on the configuration, in the step tree there are several subinstances.
At the 1st level of the subinstances are the steps, below this the step-event scripts and the
components, the actions and finally the action-event scripts and the tasks.
Step Step - 1 Manipulate NC-Data [MNCD]
In this example, under the step 1 Manipulate NC-Data [MNCD] with step ID MNCD there
is the internal component ./DescLogBook/IC1, which contains an action manipulate.
Below this there is a task for the NC target area with the name New Job. In the task, data in
channel 1 and in channel 2 are manipulated.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
Create MyConfig - Expert
4.11 Package execution
331