Further information on the system variables can be found in the Reference list system
variables (Page 283) section.
4.11.4.4
Example of a dialog page: Package configuration
This dialog page is optional; this means that a display is only made in the logbook if it was
configured in Expert.
See also: Dependency of the dialog pages on data areas (Page 114)
Display Dialog page main instance: Package configuration
This shows as example how a change to the configuration file is shown.
In Expert, in the "Package configuration dialog - System variables" the property "preselection"
was not configured, and therefore system variable Up.
$Dialog.PackageConfig.CfgFile = " " was allocated an empty string by Expert.
Figure 4-111 Configuring in Expert: Package configuration dialog - system variables
Here, in the logbook this is displayed in the fact that string " " did not contain any information
and was now changed: changed Old: " "
The change is specified with the configuration file: "./DescLogBook_Konfig_1.upcfg"
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
Create MyConfig - Expert
4.11 Package execution
327