Hitachi Compute Blade 500 Series User Manual page 344

-s <security_strength>
Security strength
-F
No confirmation dialog box appears before the command execution.
Show items
None
Message
None
Example
[Sets security strength to high for a management module]
$ set security strength -m -s high
W0006: If confirm, management module restart and this connect is
lost.
Confirm? (y/[n]):y
I0067 : <Management module> Setting was completed.
S0002 : Command succeeded.
S0000 : Command was finished.
$
[Sets security strength to default for server blade 2 and 3]
$ set security strength -b 2,3 -s default
Confirm? (y/[n]):y
I0037 : <Blade 2> Setting was completed.
I0037 : <Blade 3> Setting was completed.
S0002 : Command succeeded.
S0000 : Command was finished.
$
[Sets security strength to high for the management module all server blades]
$ set security strength -m -b all -s high
W0006 : If confirm, management module restart and this connect
is lost.
Confirm? (y/[n]):y
I0037 : <Blade 0> Setting was completed.
I0037 : <Blade 1> Setting was completed.
I0037 : <Blade 2> Setting was completed.
I0037 : <Blade 3> Setting was completed.
I0037 : <Blade 4> Setting was completed.
I0037 : <Blade 5> Setting was completed.
I0037 : <Blade 6> Setting was completed.
2-326
Range is from 0 to 7. Multiple server blades can be selected.
When "all" is selected, this command is executed on all server blades.
high
default
This value is applied to both management modules and server blades.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide