Hitachi Compute Blade 500 Series User Manual page 214

-- Blade power setting --
Slot
Slot number of server blade in the server chassis.
EPC mask
Power capping mask (EPC)
APC mask
Power capping mask (APC)
-- Order of blade to power off --
Slot
Slot number of server blade in the server chassis.
Order
Order of server blades to power off when power consumption exceeded
power capacity.
Message
None
Example
[Shows the setting of power capacity expansion feature and power capping
feature of server blade.]
2-196
disable : Disabled. (APC mode)
Range is from 0 to 7.
enable : Not limit the power consumption by EPC.
disable : Limit the power consumption by EPC.
When you specify a non-primary server blade, the setting value is
shown in parentheses and will not affect the non-primary server blade
operation.
enable : Not limit the power consumption by APC.
disable : Limit the power consumption by APC.
When you specify a non-primary server blade, the setting value is
shown in parentheses which will not affect the non-primary server
blade operation.
This item is not displayed in DCMI mode.
Range is from 0 to 7.
Range is from 1 to 8.
When you specify a non-primary server blade, the setting value is
shown in parentheses which will not affect the non-primary server
blade operation.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide