Procedure
...
Milling
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
1.
The tool list, the wear list, the OEM tool list or the magazine is open.
2.
Position the cursor to the desired tool.
3.
If you are in the tool list or in the magazine, press the ">>" and "Details"
softkeys.
- OR -
If you are in the wear list or OEM tool list, press the "Details" softkey.
The "Tool Details" window opens.
All of the available tool data is displayed in the list.
4.
Press the "Cutting edge data" softkey if you want to display the cutting
data.
5.
Press the "Monitoring data" softkey if you want to display the monitoring
data.
Tool management
11.13 Displaying tool details
565