Siemens SINUMERIK 840D sl Operating Manual page 562

Tool management
11.11 Filtering the tool management lists
Procedure
...
...
562
1. Select the "Parameter" operating area.
2. Press the "Tool list", "Tool wear" or "Magazine" softkey.
3. Press the ">>" and "Filter" softkeys.
The "Filter" window opens.
4. Activate the required filter criterion and press the "OK" softkey.
The tools that correspond to the selection criteria are displayed in the
list.
The active filter is displayed in the window header.
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Milling