When The P Position Control System Malfunctions; Ending Display - Toyota PRIUS ALPHA 2012 Quick Reference Manual

■

When the P position control system malfunctions

The "POWER" switch will not be able to be turned off. In such a case, the
switch can be turned off after applying the parking brake.
Have the vehicle inspected by your Toyota dealer immediately.
■

Ending display

When the "POWER" switch is turned off, each of the following will be dis-
played on the multi-information display, and will extinguish after approxi-
mately 30 seconds.
●
The driving distance, driving time, consumption and eco savings since
the hybrid system was started.
●
The odometer/trip meter
●
The clock
CAUTION
■
When starting the hybrid system
Always start the hybrid system while sitting in the driver's seat. Do not
depress the accelerator pedal while starting the hybrid system under any cir-
cumstances.
Doing so may cause an accident resulting in death or serious injury.
■
Stopping the hybrid system in an emergency
If you want to stop the hybrid system in an emergency while driving the vehi-
cle, press and hold the "POWER" switch for more than 3 seconds, or press it
briefly 3 times or more in succession. (→P. 556)
However, do not touch the "POWER" switch while driving except in an emer-
gency. Turning the hybrid system off while driving will not cause loss of
steering or braking control, but the power assist to these systems will be lost.
This will make it more difficult to steer and brake, so you should pull over
and stop the vehicle as soon as it is safe to do so.
2-1. Driving procedures
2
197