Panasonic KX-NS1000 Programming Manual page 818

18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
4.3.1 TIE Line Service
4.3.3 ISDN Virtual Private Network (ISDN-VPN)
Distribution Method
Selects the distribution method for incoming trunk calls. The value range of this setting depends on the card
type and Trunk Property assigned for each trunk.
Value Range
DIL: Distribution depends on the trunk through which the calls arrive
DDI/DID: Distribution depends on the DDI/DID number of the calls
MSN: Distribution depends on the MSN of the calls
Maintenance Console Location
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
Feature Guide References
2.1.1.1 Incoming Trunk Call Features—SUMMARY
2.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
2.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
DDI/DID/TIE/MSN—Remove Digit
Specifies the number of leading digits to be removed from the incoming called number for DDI/DID distribution
or for TIE line service.
Value Range
0–15
Maintenance Console Location
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
Feature Guide References
2.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
2.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
4.3.1 TIE Line Service
DDI/DID/TIE/MSN—Additional Dial
Specifies the number to be added to the incoming called number in the place of the removed digits for DDI/
DID distribution or for TIE line service.
Value Range
Max. 8 digits (consisting of 0–9, *, and #)
Maintenance Console Location
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
818 PC Programming Manual