Table of Contents
Advertisement
Component
I/O expansion module
I/O expansion power supply
I/O expansion LAN switch
ACE IP Gateway module
TB holder kit
Cable with TB holder
Backup battery
Radio installation kit
RS485 Connection Box
Function
Connects the I/O modules on
an I/O expansion frame to the
CPU module on the RTU's
main frame (frame 0),
directly or via an expansion
LAN switch).
Connects 12V power and
12V DO from the power
supply on the RTU's main
frame to an I/O expansion
frame, or from one I/O
expansion frame to another.
One switch enables
connection of up to seven
expansion frames to the main
frame CPU.
Two switches allow
connection of up to thirteen
expansion frames to the main
frame CPU.
Serves as a front end unit
between
ACE3600/MOSCAD RTUs
and control center SCADA
clients using TCP/IP
protocol.
Holds Module TBs.
A cable to connect signals to
the I/O modules.
Enables backup RTU
operation when main power
fails.
Mechanical support and
cables that enable installation
of radio.
Enables connection of up to 6
devices to the RS485 port on
the CPU (2W multi-drop).
1-8
Description
Notes
See Expansion Module
chapter.
See Expansion Power
Supply Module chapter.
See Expansion LAN Switch
chapter.
See ACE IP Gateway
Module chapter.
See I/O Modules chapter.
See I/O Modules chapter.
See Power Supply Module
and Backup Battery
chapter.
See Radio Types and
Installation Kits chapter.
See the RS485 Connection
Box chapter.
Advertisement
Table of Contents
