Module Status And Diagnostics - Motorola ACE3600 RTU Owner's Manual

Table 8-1 ACE3600 DO/DI FET Module Configurable Features
Parameter
DI Fast Capture
DI Filter
DI Counter
Filter
DI Event Time
Tagging
DI Keep Last
Value &
Predefined
Value
DI Mask
DO Keep Last
Value &
Predefined
Value
DO Mask
Sleep Mode
Each DO/DI module can be switched by the user application program to Sleep Mode. In Sleep
Mode, the module does not function and the power consumption is minimized. During Sleep
mode, the user application program will get the KLV or PDV per each DI.

Module Status and Diagnostics

In the event of a DO/DI module failure, the ERR LED on the module will be lit. This event is
registered by the CPU in the Error Logger. DO/DI module failure status is also visible to the
user application program.
The DO/DI module can be diagnosed and monitored using the STS Hardware Test utility. The
Hardware Test verifies that the module is operational, presents the module configuration and
Selection Default Setup
Disabled Disabled
/Enabled
0-254 (x 0.2 mS) 50 * 0.2 mS
(=10 mS)
0-255 (x 0.05 mS) 20 * 0.2 mS
(= 1 ms)
Disabled Disabled
/Enabled
KLV/PDV KLV
PDV = 0/1
No /Yes No
KLV/PDV KLV
PDV = 0/1
No /Yes No
8-4
Digital Output/Digital Input FET Module
Per Module/ Parameter
Input Setup Location
Input RTU
configuration
Module RTU
configuration;
'C' Program
Module RTU
configuration;
'C' Program
Input Application
Programmer I/O
link table
Input Application
Programmer I/O
link table
Input Application
Programmer I/O
link table
Output Application
Programmer I/O
link table
Output Application
Programmer I/O
link table