CHAPTER 4. MMC Programming
Program Procedure
1) Press the [TRSF] button, and enter 846.
2) Press the [SPK] key to enter the select menu.
When the cursor is at the phone number,
press the [UP & DOWN] button and
select the current phonenumber information.
Press the Soft key and move to the information
menu of each information menu, and select the
setting menu.
3) Confirm the status of terminal register for each
phone number.
4) Register the PASSWORD of terminal.
5) Register the USER ID of terminal.
6) Displays the MAC ADDRESS
of the registered terminal.
7) Displays the IP ADDRESS
of the registered terminal.
8) Displays the IP OFFSET
of the registered terminal.
9) Displays the WBS NUMBER
of the registered terminal.
10) Displays the WLI NUMBER
of the registered terminal.
11) Displays the PHONE TYPE
of the registered terminal.
12) Displays the location of the registered terminal.
Page 4-10
OfficeServ 500 Wireless LAN Service Manual/Ed.00
Display Screen
846: WIP INFO
SELECT PROG ID
[8601] REGIETERED
NO
[8601] REGIETERED
NO
[8601] PASSWORD
0000
[8601] USER ID
1212
[8601] MAC ADDR
[8601] IP ADDRESS
[8601] IP OFFSET
[8601] WBS NUMBER
[8601] WLI NUMBER
[8601] PHONE TYPE
[8601] LOCATED
NO
© SAMSUNG Electronics Co., Ltd.