Display Connection - HP 3600 v2 Series Command Reference Manual

An interface that is configured with a mandatory authentication domain treats users of the corresponding
access type as users in the mandatory authentication domain. For example, if you configure an 802.1X
mandatory authentication domain on an interface, the interface uses the domain's AAA methods for all
its 802.1X users. To cut connections of such users, use the cut connection domain isp-name command and
specify the mandatory authentication domain.
Related commands: display connection and service-type.
Examples
# Tear down all connections of ISP domain test.
<Sysname> system-view
[Sysname] cut connection domain test

display connection

Syntax
display connection [ access-type { dot1x | mac-authentication | portal } | domain isp-name | interface
interface-type interface-number | ip ip-address | mac mac-address | ucibindex ucib-index | user-name
user-name | vlan vlan-id ] [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
access-type: Specifies the user connections of the specified access type.
• dot1x: Indicates 802.1X authentication.
mac-authentication: Indicates MAC address authentication.
•
portal: Indicates portal authentication.
•
domain isp-name: Specifies the user connections of an ISP domain. The isp-name argument refers to the
name of an existing ISP domain and is a case-insensitive string of 1 to 24 characters.
interface interface-type interface-number: Specifies the user connections on an interface. Only Layer 2
Ethernet interfaces are supported.
ip ip-address: Specifies the user connections of an IP address.
mac mac-address: Specifies the user connections of a MAC address, with mac-address in the format
H-H-H.
ucibindex ucib-index: Specifies the user connection that uses the connection index. The value range is
from 0 to 4294967295.
user-name user-name: Specifies the user connections that use the username. The user-name argument is
a case-sensitive string of 1 to 80 characters. For a username entered without a domain name, the system
assumes that the user is in the default domain name or the mandatory authentication domain.
vlan vlan-id: Specifies the user connections of a VLAN, with vlan-id ranging from 1 to 4094.
slot slot-number: Specifies the user connections on an IRF member switch. The slot-number argument
represents the ID of the IRF member switch. The value range for the argument depends on the number of
member switches and their member IDs in the IRF fabric.
17