Secondary Authorization - HP 3600 v2 Series Command Reference Manual

Hide thumbs Also See for 3600 v2 Series:
Table of Contents

Advertisement

vpn-instance vpn-instance-name: Specifies the MPLS L3VPN that the secondary HWTACACS
authentication server belongs to, where vpn-instance-name is a case-sensitive string of 1 to 31 characters.
If the server is on the public network, do not specify this option.
Description
Use the secondary authentication command to specify the secondary HWTACACS authentication
server.
Use the undo secondary authentication command to remove the configuration.
By default, no secondary HWTACACS authentication server is specified.
The IP addresses of the primary and secondary authentication servers must be different. Otherwise, the
configuration fails.
If the specified server resides on an MPLS VPN, specify the VPN by using the vpn-instance
vpn-instance-name option.
If you configure the command repeatedly, only the last configuration takes effect.
You can remove an authentication server only when it is not used by any active TCP connection to send
authentication packets is using it. Removing an authentication server affects only authentication
processes that occur after the remove operation.
NOTE:
The VPN specified by this command takes precedence over the VPN specified for the HWTACACS
scheme.
Related commands: display hwtacacs and vpn-instance (HWTACACS scheme view).
Examples
# Specify the IP address and port number of the secondary authentication server for HWTACACS
scheme hwt1 as 10.163.155.13 with TCP port number 49.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] secondary authentication 10.163.155.13 49

secondary authorization

Syntax
secondary authorization ip-address [ port-number | vpn-instance vpn-instance-name ] *
undo secondary authorization
View
HWTACACS scheme view
Default level
2: System level
Parameters
ip-address: IP address of the secondary HWTACACS authorization server, in dotted decimal notation.
The default is 0.0.0.0.
port-number: Service port number of the secondary HWTACACS authorization server. It ranges from 1
to 65535 and defaults to 49.
90

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents