HP 12500 Series Configuration Manual page 120

IngressLsrID
LocalLspID
Tunnel-Interface
Fec
Nexthop
In-Label
Out-Label
In-Interface
Out-Interface
LspIndex
Tunnel ID
LsrType
Bypass In Use
BypassTunnel
Mpls-Mtu
Verify the FRR function.
6.
# Shut down the protected outgoing interface on PLR.
[SwitchB] interface vlan-interface 2
[SwitchB-Vlan-interface2] shutdown
%Sep 7 08:53:34 2004 SwitchB IFNET/5/UPDOWN:Line protocol on the interface
Vlan-interface2 turns into DOWN state
Perform the display interface tunnel 4 command on Switch A to identify the state of the primary LSP.
You can see that the tunnel interface is still up.
Perform the display mpls te tunnel-interface command on Switch A to verify the configuration of
the tunnel interface.
[SwitchA] display mpls te tunnel-interface
Tunnel Name
Tunnel Desc
Tunnel State Desc
Tunnel Attributes
LSP ID
Session ID
Admin State
Ingress LSR ID
Signaling Prot
Class Type
Reserved BW
Setup Priority
Affinity Prop/Mask
Explicit Path Name
Tie-Breaking Policy :
Metric Type
Record Route
FRR Flag
BackUpBW Type
Route Pinning
Retry Limit
Reopt
: 2.2.2.2
: 1
: Tunnel5
: 3.3.3.3/32
: 3.2.1.2
: NULL
: 1024
: ----------
: Vlan-interface4
: 4098
: 0x22002
: Ingress
: Not Exists
: Tunnel Index[---]
: 1500
: Tunnel4
: Tunnel4 Interface
: Modifying CR-LSP is setting up
:
: 1.1.1.1:1
: 10
: UP
: 1.1.1.1
: RSVP
: CT0
: 0 kbps
: 7
: 0x0/0x0
: pri-path
None
: None
: Enabled
: Enabled
: -
: Disabled
: 10
: Disabled
112
Oper State : UP
Egress LSR ID: 4.4.4.4
Resv Style : SE
Tunnel BW : 0 kbps
Hold Priority: 7
Record Label : Enabled
BackUpBW Flag: Not Supported
BackUpBW : -
Retry Interval: 10 sec
Reopt Freq : -