Display Ospf Vlink - HP FlexNetwork 3600 v2 Series Command Reference Manual

display ospf vlink

Syntax
display ospf [ process-id ] vlink [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: OSPF process ID, in the range of 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ospf vlink to display OSPF virtual link information.
If no OSPF process is specified, the OSPF virtual link information of all OSPF processes is
displayed.
Examples
# Display OSPF virtual link information.
<Sysname> display ospf vlink
Virtual-link Neighbor-ID
Interface: 10.1.2.1 (Vlan-interface20)
Cost: 1562
Transit Area: 0.0.0.1
Timers: Hello 10 , Dead 40 , Retransmit 5 , Transmit Delay 1
Table 27 Command output
Field
Virtual-link Neighbor-ID
Neighbor-State
Interface
Cost
State
Type
Transit Area
Timers
OSPF Process 1 with Router ID 3.3.3.3
Virtual Links
-> 2.2.2.2, Neighbor-State: Full
State: P-2-P Type: Virtual
Description
ID of the neighbor on the virtual link
Neighbor State: Down, Init, 2-Way, ExStart, Exchange, Loading, Full.
IP address and name of the local interface on the virtual link
Interface route cost
Interface state
Type: virtual link
Transit area ID
Values of timers: hello, dead, retransmit, and interface transmission delay
87