Validate-Source-Address - HP FlexNetwork 3600 v2 Series Command Reference Manual

Hide thumbs Also See for FlexNetwork 3600 v2 Series:
Table of Contents

Advertisement

Update timer—Defines the interval between routing updates.
Timeout timer—Defines the route aging time. If no routing update related to a route is received
after the aging time, the metric of the route is set to 16 in the routing table.
Suppress timer—Defines how long a RIP route stays in suppressed state. When the metric of
a route is 16, the route enters the suppressed state. In suppressed state, only routes which
come from the same neighbor and whose metric is less than 16 will be received by the router to
replace unreachable routes.
Garbage-collect timer—Defines the interval from when the metric of a route becomes 16 to
when it is deleted from the routing table. During the Garbage-Collect timer length, RIP
advertises the route with the routing metric set to 16. If no routing update is announced for that
route after the Garbage-Collect timer expires, the route will be deleted from the routing table.
IMPORTANT:
• Hewlett Packard Enterprise does not recommend changing the default values of these timers.
• The time lengths of these timers must be kept consistent on all routers in the network.
Examples
# Specifies the update, timeout, suppress, and garbage-collect timers as 5, 15, 15 and 30.
<Sysname> system-view
[Sysname] rip 100
[Sysname-rip-100] timers update 5 timeout 15 suppress 15 garbage-collect 30

validate-source-address

Syntax
validate-source-address
undo validate-source-address
View
RIP view
Default level
2: System level
Parameters
None
Description
Use validate-source-address to enable the source IP address validation on incoming RIP routing
updates.
Use undo validate-source-address to disable the source IP address validation.
The source IP address validation is enabled by default.
Typically Hewlett Packard Enterprise does not recommend disabling the validation.
Examples
# Disable the source IP address validation on incoming RIP routing updates.
<Sysname> system-view
[Sysname-rip] rip 100
[Sysname-rip-100] undo validate-source-address
57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents