2Nd Level: File Functions - Siemens SINUMERIK 840C Installation Instructions Manual

Hide thumbs Also See for SINUMERIK 840C:
Table of Contents

Advertisement

5 Machine Data Dialog (MDD – as from SW 3)
5.8.4 File functions (sequence of operation – as from SW 3)
Copy
Save to
disk
Load
from disk
Note

5.8.4.2 2nd level: File functions

Selection/ (Example
drive MD)
Explanation
5–38
More user manuals on
Selected file can be copied.
The on-line file data are saved into the selected file. Here again the BOOT file
has a special status (see drive installation/start-up).
The lower user data area must be selected.
The selected file is loaded into the NCK. The on-line file and the BOOT file
cannot be loaded.
If the file functions are selected after an NCK Power On, the password has to be
entered again.
Machine
data
Drive
MD
Press the Diagnosis, Start-up, Machine data, Drive MD (e.g.) and File functions
softkeys to call up the 2nd level file functions display.
ManualsBase.com
Axis
Spindle
(FDD)
(MSD)
Siemens AG 2001 All Rights Reserved 6FC5197–jAA50
09.95
Diagnosis
Start-up
File
functions
SINUMERIK 840C (IA)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simodrive 611-d

Table of Contents