LG LDV-S504 Owner's Manual page 57

System setup
Date/Time Settings
Set the Date/Time options.
NTP : Mark up when using the NTP (Network
Time Protocol) server for time adjustment.
Date Format : Select the date display format.
Time Zone : Select your Time Zone.
Time Server : Select your Time Server.
The DVR will obtain the average time among
5 public servers (rime.nist.gov, time-a.nist.gov,
time-b.nist.gov, ntp.nasa.gov, clock.isc.org).
Private Time Server : Enter the private time
server's IP address or host name.
Sync. Interval : You can set synchronize inter-
val with NTP time server to 1 day, 1 hour, 1
week and 1 month.
Daylight Saving : Mark up when you use day-
light saving function.
Update Settings
Set the Update options.
Item : Select the item for update.
- PTZ PROTOCOL : Select to PTZ PROTO-
COL update.
- SYSTEM S/W : Select to SYSTEM S/W
update.
Method : Select the update method.
- USB : Update from USB memory stick.
- Network : Update from the update server.
Update Server : Enter the IP address of
update server.
Note :
If you can not update from the update server, check
the TCP/IP options and the IP address of update
server.
Buzzer Settings
Select the buzzer options.
Button Beep : Make a sound when using the but-
tons.
Sensor Buzzer : Make a sound when an alarm
occurs.
Motion Buzzer : Make a sound when an motion
detects.
Log Out
Auto Logout : You can set the logout time.
If you mark up the option, automatically logout at
selected intervals.
Time : You can set auto logout time to 5 minutes,
10 minutes, 30 minutes or 60 minutes.
Hard Disk
Overwrite : Select the overwrite recording type
(Off, Normal Partition, Event Partition or All). This
function is possible when the selected HDD type
has fully recorded.
Full Warning : When the HDD has overflowed
rather than setting space of HDD, the warning mes-
sage is displayed.
Event Partition : Set the space of event partition
for event recording.
57