Revision-Level; Stp Bpdu-Protection - HP 3600 v2 Series Command Reference Manual

revision-level

Syntax
revision-level level
undo revision-level
View
MST region view
Default level
2: System level
Parameters
level: Specifies an MSTP revision level, in the range of 0 to 65535.
Description
Use revision-level to configure the MSTP revision level.
Use undo revision-level to restore the default MSTP revision level.
By default, the MSTP revision level is 0.
The MSTP revision level, the MST region name, and the VLAN-to-instance mapping table of a device
determine the device's MST region. When the MST region name and VLAN-to-instance mapping table
are both the same for two MST regions, they can still be differentiated by their MSTP revision levels.
After configuring this command, run the active region-configuration command to activate the configured
MST region level.
Related commands: instance, region-name, vlan-mapping modulo, display stp region-configuration,
check region-configuration, and active region-configuration.
Examples
# Set the MSTP revision level of the MST region to 5.
<Sysname> system-view
[Sysname] stp region-configuration
[Sysname-mst-region] revision-level 5

stp bpdu-protection

Syntax
stp bpdu-protection
undo stp bpdu-protection
View
System view
Default level
2: System level
Parameters
None
126