Nqa Schedule - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

<Sysname> system-view
[Sysname] nqa agent enable
Related commands
nqa server enable

nqa schedule

Use nqa schedule to configure the scheduling parameters for an NQA operation.
Use undo nqa schedule to stop the operation.
Syntax
nqa schedule admin-name operation-tag start-time { hh:mm:ss [ yyyy/mm/dd | mm/dd/yyyy ] | now }
lifetime { lifetime | forever } [ recurring ]
undo nqa schedule admin-name operation-tag
Default
No schedule is configured for an NQA operation.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
admin-name: Specifies the name of the administrator who creates the NQA operation, a case-insensitive
string of 1 to 32 characters that cannot contain hyphens (-).
operation-tag: Specifies the tag of the operation, a case-insensitive string of 1 to 32 characters that
cannot contain hyphens (-).
start-time: Specifies the start time and date of the NQA operation.
hh:mm:ss: Specifies the start time of an NQA operation.
yyyy/mm/dd: Specifies the start date of an NQA operation. The default value is the current system time,
and the value for yyyy is in the range of 2000 to 2035.
mm/dd/yyyy: Specifies the start date of an NQA operation. The default value is the current system time,
and the value for yyyy is in the range of 2000 to 2035.
now: Starts the operation immediately.
lifetime: Specifies the duration of an operation.
lifetime: Specifies the duration of an operation in seconds, in the range of 1 to 2147483647.
forever: Performs the operation until you stop it with the undo nqa schedule command.
recurring: Run the operation automatically at the start time and for the specified duration
Usage guidelines
You cannot enter the operation view or operation type view of a scheduled NQA operation.
Specify a lifetime long enough for an operation to complete.
45