Security-Logfile Save; Terminal Debugging - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

security-logfile save

Use security-logfile save to manually save security logs from the security log file buffer into the security
log file.
Syntax
security-logfile save
Views
Any view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
The system clears the security log file buffer after saving security logs into the security log file
automatically or manually.
A local user can use this command only after being authorized as the security log administrator by the
system administrator. For more information about security log administrator, see Security Configuration
Guide.
Examples
# Manually save the security logs in the security log file buffer into the security log file.
<Sysname> security-logfile save
The contents in the security log file buffer have been saved to the file
flash:/seclog/seclog.log.
Related commands
• info-center security-logfile directory
authorization-attribute (Security Command Reference)
•

terminal debugging

Use terminal debugging to enable the display of debug information on the current terminal.
Use undo terminal debugging to disable the display of debug information on the current terminal.
Syntax
terminal debugging
undo terminal debugging
Default
The display of debug information is enabled on the console and disabled on the current terminal.
Views
User view
Predefined user roles
network-admin
233