Setup For Usb Recording - Bosch DISBLAY DDU 7 Manual

13.4
Notice
Notice
Bosch Motorsport

Setup for USB recording

This function requires the installation of Software Upgrade 2.
Enable the Software Upgrade for USB recording
USB recording is enabled by Software Upgrade 2.
To activate Software Upgrade 2, enter the license key as described in the chapter
'Feature activation'.
For USB recording, Software Upgrade 2, enter the license key
as described in the chapter 'Feature activation
Wiring harness
Bit
Pin 23
Pin 24
Pin 25
Pin 26
Colors matching a standard USB cable
Storage device
The recording function can be used with a dedicated Bosch Motorsport USB de‐
vice. The USB device has to be preformatted with the Bosch File System (BFS) in
RaceCon before first use.
To format the USB device with the Bosch File System (BFS), do the following
steps:
1. Insert the USB device into the PC and wait until it has been installed by Win‐
dows.
2. In RaceCon, select 'Extras' and choose 'Format USB stick'.
DDU 7 Manual
Recording and Telemetry | 13
[} 20]'.
Value
Power (red)
D+ (green)
D‐ (white)
GND (black)
119 / 160