Starter Commissioning Tool; Important Starter Functions - Siemens SINAMICS S120 Commissioning Manual

Commissioning

2.2 STARTER commissioning tool

Note
The design guidelines and safety information in the Equipment Manuals must be carefully
observed (refer to the documentation SINAMICS S120, Equipment Manual).
CAUTION
In STARTER, after the changeover of the axis type via p9302/p9502 and subsequent
POWER ON, the units that depend on the axis type are only updated after a project upload.
2.2 STARTER commissioning tool
Brief description
STARTER is used for commissioning drive units in the MICROMASTER and SINAMICS
product ranges.
STARTER can be used for the following:
● Commissioning
● Testing (via the control panel)
● Drive optimization
● Diagnostics
System prerequisites
The system requirements for STARTER can be found in the "Readme" file in the STARTER
installation directory.
2.2.1

Important STARTER functions

Description
STARTER supports the following tools for managing the project:
● Copy RAM to ROM
● Download to target device
● Load to PG/PC
● Restoring the factory settings
● Commissioning Wizard
● Displaying toolbars
44
Commissioning Manual, (IH1), 07/2007 Edition, 6SL3097-2AF00-0BP7
Commissioning