Sending A Text Message To An E-Mail Address - Siemens GIGASET SL55 Manual

SMS (text messages)

Sending a text message to an e-mail address

You can send a text message to an e-mail address. To do this you should write the recip-
ient's e-mail address at the start of the text message and send this text message to the
number for your SMS send centre's e-mail service.
Entering the e-mail address at the start of the text message
Enter the recipient's e-mail address at the start of your text message. Separate the e-mail
address and the message text using a space or a colon (other providers).
If the predictive text feature is deactivated enter the character "@" using the hash
key # (press 2 x ), the colon using the Q key (press 8x) and a space using 1 (press 1 x).
If predictive text is activated, enter "@" by pressing the hash key # once and holding
it down and then pressing it once briefly.
You can use
Options
Requirement: You are writing a text message (page 37) and the input field is open.
~
Entering the message text
~
Options
Send
Sending a text message as an e-mail
You must send the text messages to the number for your send center's e-mail service.
~
Í
Send
42
, s s
to temporarily store the message.
OK
/
Enter the full e-mail address and end it with a space
or a colon.
Enter the message text.
p.mustermann@name.de
Hallo Peter
hgi
X
Press the display key to open the menu.
Confirm.
OK
Enter the number of the e-mail service.
Dest.call no.
6245
z {
Press the display key to open the menu.
Confirm.
OK
E-mail address, space,
message text (example)
Ç
Abc
Options
X Í