CHAPTER 6: SETPOINTS
339 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL
ENTER NEW PASSWORD
The user is prompted to enter a new Local Setpoints Password. A valid password is
alphanumeric, and is 3 to 10 characters in length. An INVALID PASSWORD message will
appear if the new password does not meet the password requirements. If a valid
password was entered, the user will be prompted to re-enter the new password.
CONFIRM PASSWORD
The user is prompted to re-enter the new Local Setpoints Password. If the passwords do
not match, an ENTRY MISMATCH message will appear, the password will remain
unchanged, and the user will be returned to the Enter New Password page. If the
passwords match, a PASSWORD CHANGED message will appear indicating the Local
Setpoints Password has successfully been updated.
S1 RELAY SETUP
6–11