Printer Related Adjustment; Grid Pattern - Toshiba e-STUDIO206L Service Manual

6.3.3

Printer related adjustment

The printer related adjustment is performed by using the printed out grid pattern.
1
Adjustment
Tolerance
A 200 ± 0.5mm
B 52 ± 0.5mm
C 200 ± 0.5mm
D 52 ± 0.5mm
E 52 ± 0.5mm
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
SETTING / ADJUSTMENT
A
6
B, E
Fig.6-9 Grid pattern
 P. 6-9 "[A] Reproduction ratio of primary scanning direction (Fine adjustment of
polygonal motor rotation speed (Printer))"
 P. 6-9 "[B] Primary scanning data laser writing start position (Printer)"
 P. 6-10 "[C] Reproduction ratio of secondary scanning direction (Fine
adjustment of main motor rotation speed (Copier/Printer))"
 P. 6-11 "[D] Secondary scanning data laser writing start position"
 P. 6-12 "[E] Primary scanning data laser writing start position at duplexing"
6 - 8
21
Detail of adjustment
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved