Transfer Unit; Temperature/Humidity Sensor (S25) - Toshiba e-STUDIO206L Service Manual

4.11.17 Transfer unit

Notes:
When taking off the transfer unit, take off the process unit first to prevent the drum from light.
(1) Take off the automatic duplexing unit.
 P. 4-134 "4.15.1 Automatic Duplexing
Unit (ADU)"
(2) Take off 2 brackets by removing 2 screws
each.
(3) Disconnect 1 connector and then take off the
transfer unit.

4.11.18 Temperature/humidity sensor (S25)

(1) Take off the rear cover.
 P. 4-3 "4.1.6 Rear cover"
(2) Disconnect 1 connector, remove 1 screw and
then take off the temperature/humidity
sensor.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Transfer unit
Fig. 4-281
Temperature/humidity sensor
Fig. 4-282
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 99
DISASSEMBLY AND REPLACEMENT
4