Firmware Revisions - GE C30 Instruction Manual

CHAPTER 6: ACTUAL VALUES
The order code, serial number, Ethernet MAC address, date and time of manufacture, and operating time are shown here.
The rear panel on the device contains similar information.

6.5.2 Firmware revisions

ACTUAL VALUES  PRODUCT INFO  FIRMWARE REVISIONS
 FIRMWARE REVISIONS

The shown data is illustrative only. A modification file number of 0 indicates that, currently, no modifications have been
installed.
C30 CONTROLLER SYSTEM – INSTRUCTION MANUAL
LAST SETTING CHANGE:

1970/01/01 23:11:19
C30 Relay

REVISION: 7.3x
MODIFICATION FILE

NUMBER: 0
BOOT PROGRAM

REVISION: 7.01
FRONT PANEL PROGRAM

REVISION: 2.01
COMPILE DATE:

2013/09/15 04:55:16
BOOT DATE:

2013/09/15 16:41:32
FPGA PROGRAM:

REVISION: 01.05
FPGA DATA:

2013/09/15 16:41:32
PRODUCT INFORMATION
Range: YYYY/MM/DD HH:MM:SS
Range: 0.00 to 655.35
Revision number of the application firmware.
Range: 0 to 65535 (ID of the MOD FILE)
Value is 0 for each standard firmware release.
Range: 0.00 to 655.35
Revision number of the boot program firmware.
Range: 0.00 to 655.35
Revision number of faceplate program firmware.
Range: YYYY/MM/DD HH:MM:SS
Date and time when product firmware was built.
Range: YYYY/MM/DD HH:MM:SS
Date and time when the boot program was built.
Range: 0.00 to 655.35
Revision number for FPGA.
Range: YYYY/MM/DD HH:MM:SS
Date and time when the FPGA was built.
6
6-13