GE C30 Instruction Manual page 157

CHAPTER 5: SETTINGS PRODUCT SETUP
EnerVista setup for IEC 61850
The EnerVista UR Setup software provides the interface to configure C30 settings for the IEC 61850 protocol. This section
describes this interface. The software also supports import and export of IEC 61850 Substation Configuration Language
(SCL) files as documented in the UR Series Communications Guide.
Unlike other UR settings, IEC 61850 protocol configuration settings cannot be accessed through the UR front panel. These
settings are accessible with the EnerVista software, via MMS query, read, and write services, or via 61850 Substation
Configuration Language (SCL) file transfer. Accordingly, whereas other settings are presented in this manual as they
appear on the front panel, IEC 61850 settings are presented as they appear in the software. See the UR Series
Communications Guide for MMS and SCL access. Note that if you update the IEC 61850 settings in the EnerVista software
by writing to them by MMS while the corresponding IEC 61850 panel is open in EnerVista, you need to close then open the
panel in EnerVista for the correct readings to display.
All IEC 61850 protocol configuration settings are accessed through software panels that are selected either in the Online
Window area (see figure) or the Offline Window area in the EnerVista software.
Figure 5-9: IEC 61850 protocol panel in EnerVista software
5
The IEC 61850 window is divided into a navigation pane on the left and a settings panel on the right. You expand and click
an option on the left to display its panel on the right. The following figure shows an example for Server Configuration. The
setting entry panel contains in the SETTING column the names of the settings, and the settings entry boxes are in the
PARAMETER column. Hovering the mouse over a setting name displays a tool-tip showing the 61850 information model
name of the setting or its location in SCL files.
C30 CONTROLLER SYSTEM – INSTRUCTION MANUAL 5-39