Siemens SINUMERIK 810D Commissioning Manual page 74

Backing up and Restoring Data
4.1 Backing up/restoring data with an Ethernet connection
5. Return to the previous menu:
"Optional" end
The following steps are always applicable:
Backing up the hard disk
You can now start the transfer:
1. Press key <2>: Harddisk Backup to <path name>, Mode LOCAL/NETWORK
Your Choice [1, 2]?
If you do NOT want to back up local partition data (substantial reduction in transfer time and
memory), select:
1. Press key <1>: Backup WITHOUT Local Images or
2. Press key <2>: Backup WITH Local Images.
3. Press key <9>: Return to the previous menu
4-4
<name>.gho
<name>.001
<name>.002
<name>. ...
Press key <9>: Back to previous Menu
Prompt: Save GHOST parameters? Answer Yes.
The following menu appears if local partition data are available:
PLEASE SELECT
1 Backup WITHOUT Local Images
2 Backup WITH Local Images
– A message window then opens:
You are prompted to check whether a connection exists between the PCU and the
PG/PC. The target path for the directory on the PG/PC in which the backup image is
to be stored is displayed. You are prompted to check whether this directory exists on
the PG/PC.
– Type "Y" in the message window to acknowledge and start the backup on the PCU.
The Norton Ghost message window appears with: Display of the transfer progress, the
paths used and details of the data volumes to be transferred.
– If the backup is cancelled, a query appears:
Do you want to try to backup again [Y, N]?
Press N to return to the main menu. Press "Y" to restart the backup from scratch.
Commissioning Manual, 10/2006, 6FC5397-0DP10-0BA0
PCU Basesoftware (IM6)