Configuring The System; Service Menu Functions (Dos Function) - Siemens SINUMERIK 810D Commissioning Manual

Configuring the system

2.1

Service menu functions (DOS function)

2.1
Functions - overview
The Service menu offers:
● Functions for installing/updating the HMI system software
● Functions for saving/restoring data
The following functions are available in the Service menu:
Main menu Function
1 Install/Update SINUMERIK System: Installation and addition to or updating of the SINUMERIK system
1 Install from Floppy Disk
2 Install via Serial/Parallel Line: Serial connection/parallel connection
3 Install from Network Drive: Network connection
1
PCU Basesoftware (IM6)
Commissioning Manual, 10/2006, 6FC5397-0DP10-0BA0
Manage Network Drives
1 Connect to Network Drives, enter connection data
2 Show connected Network Drives
3 Disconnect from all Network Drives
4 Change Network Settings,
1 Change Machine Name (for DOS-Net only)
2 Change User Name
3 Toggle protocol
4 Toggle logon to domain (Yes or No)
[5] Change Domain Name
[6] Change TCP/IP settings
1 Toggle "Get IP Addresses" (automatically/manually)
2 Change IP Address
3 Change Subnetmask
4 Change Gateway
5 Domain name server
6 Change DNS Extension
9 Back to previous menu
9 Back to previous menu
9 Back to previous menu
2
2-1