D-Link UWS User Manual
TraceRoute
You can use the TraceRoute utility to discover the paths that a packet takes to a remote destination.
To display this page, click LAN > Administration > TraceRoute in the navigation tree.
Hostname/IP Address Enter the IP address or the hostname of the station you want the switch to discover
Probes Per Hop
MaxTTL
InitTTL
MaxFail
Interval
Port
Size
TraceRoute
• Click Submit to initiate the traceroute. The results display in the TraceRoute box.
D-Link
Oct. 2015
Figure 29: TraceRoute
Table 24: TraceRoute Fields
Definition
path for.
Enter the number of times each hop should be probed.
Enter the maximum time-to-live for a packet in number of hops.
Enter the initial time-to-live for a packet in number of hops.
Enter the maximum number of failures allowed in the session.
Enter the time between probes in seconds.
Enter the UDP destination port in probe packets.
Enter the size of probe packets.
Displays the output from a traceroute.
Unified Wired and Wireless Access System
TraceRoute
Page 96