Up0/E Module - Siemens HiPath 1100 Service Manual

Display
Continuous
Continuous
Table 3-21 Display indications of TME1 module (S2 access)
3.5.5
U
P0/E
Introduction
With these modules you can connect U
via 8, 4 or 2 U interfaces, and to a HiPath 1120 system via 4 or 2 U
P0/E
"System expansion limitations" on page 2-30).
CTR-U module installation is required.
UP0/E module" on page 4-158 )
3.5.5.1 U
P0/E
HiPath 1120
Interfaces
Figure 3-20 U
P0/E
Service Manual
Reading
Network link operational.
Link with mainboard operational.
module
and CTR U
module
module HiPath 1120
module
P0/E
telephones (optiPoint 500) to a HiPath 1150/1190
P0/E
no in MB module (see "Installing a CTR-
P0/E
Expansion modules (EB)
Meaning
interfaces (see
P0/E
Modules
3-77