Siemens HiPath 1100 Service Manual page 244

Configuring the system specifically for the client
Comments about the system's programming codes
If Number 3 is a VMI:
Last: the message is stored in Number 1's mailbox. If Number 1 does not have
●
a mailbox, the Voice Mail must request the port for recording the message
First: the message is stored in Number 2's Mailbox.
●
Time in a UCD Queue (031)
This setting specifies the maximum length of time a call is allowed to remain in a UCD Queue.
Once the time expires, the call is disconnected or forwarded to a UCD overflow call extension. The default setting for a call to
remain in a Queue is 1 minute.
Waiting Message before Signaling a UCD Call (032)
This feature allows you to connect a call waiting message for incoming calls before they ring at an extension.
Minimum Time for Call Waiting Message in a UCD Queue (033)
This setting specifies a minimum length of time until a message is played for calls waiting in a UCD Queue (032).
This feature works only when the Time in a UCD Queue option is enabled (Code
031).
Hunt Groups (HG) (021)
This setting allows you to group extensions into a maximum of 10 Hunt Groups (780 to 789).
A Hunt Group (HG) is a group of extensions assigned for answering calls made to a specific number.
When an extension does not answer an internal or external call within a specified period of time, the call rings consecutively
at the available and the busy extensions in the group. When no one is available, the extension may disconnect from the Hunt
Group.
This feature works only for digital lines.
Call Forwarding within a Hunt Group (HG) (223)
This feature works only for digital lines. It provides call forwarding for extensions belonging to Hunt Groups. When a call is
directed to a group, it ring at each extension, according to the group settings (linear or round-robin) When an extension is set
for Call Forwarding, calls are routed to the destination as configured. If a call is not answered, the other extensions in that group
do not ring. When no Call Forwarding is set, calls ring at the other extensions, as configured for the Hunt Group.
6-244
Service Manual