Setup As Smtp Mail Server - Panasonic DX-600 Network Fax Manual

Setup as SMTP Mail Server

To install your machine as SMTP mail server, the following network parameters need to be programmed on
your network and on your machine.
• IP Address of the DNS Server (if not available, see Note 2)
• IP Address of your machine
• Subnet Mask of your machine
• Name or IP Address of the Default SMTP mail server
• IP Address of the Default Gateway
• Email Address of your machine (see Note 1)
• Host Name
• SMTP Authentication Name (when authentication with the SMTP server is required)
• SMTP Authentication Password (when authentication with the SMTP server is required)
Email (from your machine to a PC) and Direct IFAX XMT Transmission
ifaxuser@fax01.panasonic.com
ifaxuser@fax02.panasonic.com
Email (from a PC to your machine) and Direct IFAX XMT Reception
ifaxuser@fax01.panasonic.com
popuser001@panasonic.com
1. To function as SMTP mail server, your machine's email address must include its unique Host
NOTE
name within your company domain. This unique Host name must be registered within your
network's DNS (Domain Name System) server. Example: Internet_Fax@fax01.panasonic.com
2. By default the machine requires the IP Address of the DNS Server and prompts you to enter
the SMTP Server Name. If the DNS Server is not available, change the Fax Parameter No.
161 (DNS SERVER) to "1:Invalid". Then the machine will prompt you to enter the IP Address
of the SMTP Server.
Pre Installation Information
Direct IFAX XMT
Router(Gateway)
SMTP
POP3
popuser001@panasonic.com
Direct IFAX XMT
Router(Gateway)
SMTP
SMTP01.panasonic.com
(SMTP Mail Server)
POP02.panasonic.com
(POP Server)
SMTP01.panasonic.com
(SMTP Mail Server)
ifaxuser@fax02.panasonic.com
17